G1 ClearVision Smart Glass

15ml

$19.95

$19.95

Description Returns Shipping & Pickup

Quick Overview

Hydrophobic
Durable chemical bond
Last up to 20,000 miles

This product cannot be shipped to the state of California due to material laws.

Product Description

Why Use G1 ClearVision Smart Glass?

Enhance your driving experience with G1 ClearVision Smart Glass – a water-repellent coating that provides unparalleled performance in wet weather conditions. Unlike ordinary rain repellents, G1 chemically bonds to glass surfaces for long-lasting durability and protection, even in heavy rain and sleet.

G1 creates an ultra-smooth hydrophobic coating that causes water droplets to bead up and roll off the glass, improving visibility and reducing the need for windshield wipers. Whether you’re driving through rain, snow, or other harsh weather conditions, you’ll enjoy a clear view of the road ahead with minimal eye strain.

For maximum coverage, G1 is available in two sizes:

15ml bottle for windscreens only
100ml bottle for all exterior glass

Supplied with G2 Residue Remover, G1 ensures invisible glass clarity while maintaining a sleek finish that stands up to wet weather and daily wear.

Simple steps to help you get the best results

Make sure you are working in a well ventilated area, in a temperature that is 5°c or above
Wear gloves and do not apply in direct sunlight
Clean all glass you are going to protect with G6 Perfect Glass and an MF5 Power Glass Cloth
For best results machine polish the glass with G4 Nano Glass Polish and a medium pad. Or alternatively, polish the glass with G4 Nano Glass Polish and a hand polishing pad. Apply a small amount and polish in a circular motion
Once finished, clean the glass back to a shine with G6 Perfect Glass and an MF5 or MF1 ZeroR Microfibre Buff Cloth – repeat this as many times as needed to remove all residue
Shake bottle well before use
For windscreens we recommend using 3 layers of G1, but for side and rear screens only 1 layer is needed
Apply a liberal amount of G1 to an AP1 Lint-Free Applicator Pad
Work product into the glass in a circular motion covering all of the glass, and leave to cure for 5 minutes
Using a new AP1 apply the same amount of product to the pad, but this time put G1 over your previous layer in a side to side motion, leave for a further 5 minutes to cure
Apply your third layer with the same amount of product on an AP1, however this time apply in vertical straight lines, leave to cure for 15 minutes
Remove cured residue, with G2 Residue Remover. Dab the G2 onto the remaining applicator and apply to a small area at a time, then buff the glass immediately with an MF1 cloth
Finish by cleaning the wiper blades and glass with G6 Perfect Glass and an MF5
We recommend you apply a layer of G1 on your wiper blades without removing residue. If wiper blades are worn they should be replaced
Do not expose your car to the elements for at least 3 hours
Store in a cool, dry place
Use G1 and G2 within 3 months of opening
There may be some wiper blade judder, in 90% of cases this will disappear within two weeks. Please take a look at our FAQ section if this problem persists

Safety Data Sheets

Take a look at the Safety Data Sheet for G1
Take a look at the Safety Data Sheet for G2

Gtechniq Difference

At Gtechniq, we are committed to engineering smarter surfaces with proven performance. Our G1 ClearVision Smart Glass is lab-built and rigorously tested in real-world conditions. G1 delivers a superior hydrophobic coating that enhances safety and clarity, even in heavy rain.

Unlike conventional coatings, G1’s durable chemical bond ensures exceptional longevity, lasting up to 20,000 miles without losing effectiveness. Experience clearer vision, easier maintenance, and unmatched performance in wet weather conditions with Gtechniq.

Frequently Asked Questions

How does G1 ClearVision Smart Glass improve visibility in wet weather?

G1’s hydrophobic coating repels water, causing it to form water droplets that roll off the glass. This significantly reduces the need for windshield wipers, improving visibility in rain, sleet, and snow.

How long does the G1 coating last?

G1 lasts up to 20,000 miles thanks to its durable chemical bond with the glass surface. Regular maintenance helps prolong its effectiveness.

Can G1 be applied to headlights or plastic trim?

No, G1 is specifically formulated for glass surfaces. For headlights and plastic trim, use G5 Water Repellent for Glass and Perspex.

Is G1 suitable for rear windows and side glass?

Yes, G1 works perfectly on all exterior glass surfaces, including rear screens and side windows. Use fewer coats for these areas compared to the windshield.

Will G1 work in cold weather conditions?

Absolutely. G1 provides excellent protection in wet weather conditions, including heavy rain, snow, and sleet, ensuring optimal clarity and safety.

We want you to be happy with every product. Unopened products in their original packaging can be returned within 30 days with your receipt or order confirmation for a refund or exchange.

Because of the nature of our products, opened chemicals, soaps, and coatings are final sale. Towels, brushes, pads, and accessories must be unused and in resalable condition. Class enrollments and store credit are non-refundable but can be transferred to a future class. Received something damaged? Contact us within 7 days and we will make it right.

To start a return, bring your item and receipt to any location or call (818) 888-7111.

Right now we offer free in-store pickup at all three San Fernando Valley locations. Order online and our team has it ready at the counter, often the same day. You will get a notification when your order is ready.

Pickup at Winnetka, North Hills, and Canoga Park. Bring your order confirmation and a photo ID. Orders are held for 14 days. Nationwide shipping is coming soon.