IronX Snow Soap Sample (50ml)

The first step in total paint decontamination! 

When creating Iron-X Snow Soap, we imagined the time that could be saved by combining the iron-fallout removing power of Iron-X, with the cleaning and lubricating capabilities of an environmentally friendly surfactant. This idea formed the basis of one of the most versatile, and effective maintenance products on the market. By changing the dilution ratio, Iron-X Snow Soap can be used as an iron-removing snow soap with a foam lance, or wash mitt! It can also be used as a lubricant for clay and polymer decon products, or even a maintenance wheel cleaner. A true multi-purpose cleaner.

My personal favorite use of IronX Snow Soap is as a strong prep wash to assist in the removal of old wax, traffic film, grime, dirt, and brake dust/iron contaminants whilst providing an excellent lubricated surface during the wash cycle. 

Features:

• pH Neutral.
• High lubricity.
• Uses only the highest quality cleaning agents & emulsifiers to wash your vehicles surfaces.
• Snow Soap cuts through grime & traffic film with ease.
• Excellent wheel cleaner - Agitate the gel directly on the surface of the wheel.
• Cleanses the bodywork softly with rich foam.
• Smooths the surface.
• Use on paint, glass, wheels, headlights, plastic trim, and clear bras.

Directions as Snow Foam: 

• Rinse your car using a pressure washer to remove dust & contaminants.
• Add soap gel to warm water and shake well to mix within the snow foam lance.
• Set your lance to give the desired effect and foam concentration you require.
• Snow foam your car as normal and allow to dwell.
• Dependent on the concentrations of the foam on the cars surface. You may notice a color change taking place when the foam is in contact with heavy fallout.
• Rinse well, prior to moving on to your hand wash process.

Directions as Hand Wash:

• Thoroughly rinse the surface to remove all large and/or loose particles.
• Apply soap directly to mitt and wash a section before rinsing the mitt and repeating with the next section.  (While snow soap is used as a hand wash. It should not be added to your wash bucket)
• You will notice the soap gel changing color where it encounters iron.  This indicates fallout removal and highlights the areas of concern where you may wish to follow up with either IronX paste or liquid, later on in the decontamination process.  While small iron particles will be removed, larger particles or vehicles that have not been thoroughly decontaminated previously will require the higher concentrated IronX or IronX Paste. 
• Thoroughly rinse all surfaces.

Notes:

• IronX Snow Soap will affect oil base waxes by approximately 50%. 
• Do not use as a maintenance wash unless you are decontaminating your vehicle or it has been protected with a durable sealant or a coating (such as CQUARTZ, or CQUARTZ UK).
• Avoid using on fabric convertible tops.

Precautions:

• Do not allow to dry on surface in sun.  Avoid use on warm surfaces and in direct sun.
• Wash your hands well after use.
• May be irritating to eye & skin. We recommend the use of skin and eye protection for total peace of mind.
• Keep away from children.