CARPRO IronX LimeScale - Iron and Mineral Remover

CARPRO IronX LimeScale - Iron and Mineral Remover

500ml
$20.99
$20.99
Skip to product information
CARPRO IronX LimeScale - Iron and Mineral Remover
  • CARPRO IronX LimeScale - Iron and Mineral Remover
CARPRO IronX LimeScale - Iron and Mineral Remover

CARPRO IronX LimeScale - Iron and Mineral Remover

$20.99
$20.99
Size

CARPRO IronX LimeScale

Single Step Hybrid Decontamination for Iron Dust & Water Spots

IronX LimeScale is a dual-action cleaner that transforms the decontamination process by removing iron fallout and eliminating mineral spots in a single step.

Its unique composition breaks down stubborn ferrous particles from brake and rail dust, while simultaneously dissolving mineral deposits such as calcium and minerals left by most hard water sources. The result is a surface that’s smooth, spotless, and fully decontaminated: ready for polishing or sealant. This cutting-edge formula saves time while delivering uncompromising results.  

IronX LimeScale dissolves nearly any contaminant from the exterior paint, glass, wheels, and more, saving you time, and leaving the surface ready for polish or protection.

Whether it be vehicles braking on the highway during your daily commute, rail dust during your new cars voyage from the factory, or sprinkler water spraying your paint when you least expect it, CARPRO has you covered with IronX Limescale!

Features:

  • Optimal for prepping vehicle before compound, polish, or sealant.
  • Combines iron and mineral removal in a single step
  • Dissolves brake dust, rail fallout, and water spots
  • Restores smoothness and cleanliness before coating or sealing
  • Saves time and energy during decontamination

Available Sizes:

  • Available in 50 ml (sample size), 500 ml (standard bottle), 1 liter (refill size), 1 US gallon (bulk size)

Directions:

  1. Shake bottle.
  2. Wash the vehicle, rinse, and remove the majority of the water with a quick once-over. 
  3. Spray IronX LimeScale across the contaminated area.
  4. After 30–120 seconds (depending on climate), agitate with a wash mitt and rinse off thoroughly.
  5. Dry vehicle.

Precautions:

  • Test in inconspicuous area before use.
  • Use only with caution and at your own risk on raw aluminum surfaces.
  • Do not use on anodized surfaces.
  • Do not use on unknown aftermarket finishes, or low cost acrylic paint.
  • Do not use on fabric convertible tops or rubber that contains recycled tires.
  • Keep out of reach of children and pets.
  • Do not ingest.
  • Use outside or in ventilated area.
  • Avoid prolonged contact with skin.
  • Avoid inhalation.
  • Use PPE. 

FAQ:

  • Q: Is IronX Limescale best to use for prepping the car?
  • A: Yes, if you plan to compound, polish, or seal your car then IronX Limescale is usually the very best option on the market to achieve your goal.
  • Q: How much iron remover power is in the LimeScale version compared to IronX?
  • A: 10% less iron active remover
  • Q: How much mineral spot remover power is in IronX LimeScale compared to Spotless or Descale?
  • A: About 10% more lime scale remover.
  • Q: Is IronX Limescale best to use for decontaminating my new ceramic coating?
  • A: No, IronX Limescale is MORE aggressive towards the ceramic coating than our standard IronX.  The best rule of thumb is always least aggressive method first.  For this reason we strongly advise you to use IronX as the safest way to remove brake dust and fallout from your ceramic coated vehicle without affecting the water beading of your coating.  If you live in an area with HIGH amounts of mineral deposits on your vehicle then IronX Limescale may be necessary.  It will not remove your ceramic coating but can affect the hydrophobic nature of the coating, especially the longer and more often it is used.  
  • Q: How does LimeScale fit between Spotless and Descale for mineral removal?
  • A: LimeScale actually contains more limescale remover than either of the others. Spotless is the most affordable of the three and is a spray-on product designed specifically for removing mineral spots. Descale and LimeScale are similarly priced per ounce, but Descale functions as a soap, so depending on how it’s applied, it may cost less per treatment than LimeScale.
  • While IronX LimeScale costs slightly more per application, it is priced just a buck or so above IronX, making it an excellent value. Many shops will likely save both time and money thanks to the efficiency of IronX LimeScale when using it to prep vehicles.
  • It’s worth noting that certain types of minerals may be more easily removed by one product than another. Because of this, you may prefer to test each product in your specific environment to determine which delivers the best results for your needs.

We want you to be happy with every product. Unopened products in their original packaging can be returned within 30 days with your receipt or order confirmation for a refund or exchange.

Because of the nature of our products, opened chemicals, soaps, and coatings are final sale. Towels, brushes, pads, and accessories must be unused and in resalable condition. Class enrollments and store credit are non-refundable but can be transferred to a future class. Received something damaged? Contact us within 7 days and we will make it right.

To start a return, bring your item and receipt to any location or call (818) 888-7111.

Right now we offer free in-store pickup at all three San Fernando Valley locations. Order online and our team has it ready at the counter, often the same day. You will get a notification when your order is ready.

Pickup at Winnetka, North Hills, and Canoga Park. Bring your order confirmation and a photo ID. Orders are held for 14 days. Nationwide shipping is coming soon.

You may also like